Frequently asked questions
Answers to common questions about Autoentic and about checking a used car's paint. For definitions, see the glossary.
Enter the car's VIN at autoentic.com/paint-passport. The lookup is free and needs no account, and you don't need to own the car. If the car has no inspection to show, the page says so, and that doesn't mean the paint is original. Looking up a car by VIN explains each result.
FOCS, the Factory Originality Confidence Score, is a number from 0 to 100 for how confident the measurement is that the paint is factory-applied. There is one per inspection, and it is not a percentage of original paint. A high score means the readings are consistent with factory paint. A low score means they are not, or that the measurement could not be sure. On a Paint Passport, the score sits beside the grade for the whole car. Reading your vehicle report walks through every line of a Paint Passport.
A Paint Passport records a measurement, not a report of events. A technician measures the paint panel by panel with a professional paint thickness probe, and Autoentic compares each panel with factory data for that model. The score is GUM-based. The GUM is the international guide to measurement uncertainty, and the score allows for the normal variation in any paint measurement. Each record is sealed when it is submitted. A later change to a sealed record would show. A new inspection is added beside the earlier ones and never replaces them. A record says what was measured. It never says why a panel was refinished, and it is not a guarantee.
Look, then measure. A door whose color or shine doesn't quite match the panel beside it can point to a repair. So can paint on a rubber seal. A careful repaint shows none of these, and can look just like factory paint. A paint thickness gauge shows how thick the paint is. But factory paint differs by make, model and year. So without factory data for that model, a reading alone doesn't say whether a panel was repainted. Autoentic compares each panel with factory data for that model and saves the result to the car's VIN. Check a used car's paint before you buy walks through each way of checking.
Paint protection film, or PPF, is a clear film some owners put over the paint. It can't hide from a paint gauge, which reads it along with the paint. So a panel under film can read like a repaint. A ceramic coating is far thinner than film, so it adds much less to a reading. When the measurement can't tell what an added layer is, Autoentic marks the panel Added Layer (Undetermined Type) instead of guessing either way. The paint underneath is then unverified. Check a used car's paint before you buy explains what a gauge reading can and can't tell you.
Autoentic doesn't say what paint does to a car's price. The record gives the buyer and the seller the same facts about the paint, so neither has to guess. How much a refinished panel matters is the buyer's call. One refinished fender on a ten-year-old car is a different conversation from four refinished panels on a three-year-old one. A Refinished label says nothing about the quality of the work. Check a used car's paint before you buy explains what to ask about a refinished panel.
To have a car measured, see Pricing.