Search documentation

Search across all Autoentic documentation pages.

Docs

Autoentic for body shops, inspectors, insurers, lenders and fleets

Autoentic measures the paint thickness on a car's body panels, compares each panel with factory data for that model, and saves the result to the car's vehicle identification number, or VIN, as a Paint Passport that anyone can look up free. This page is for body shops, independent inspectors, insurers, lenders and fleets. You can check any car's VIN for a Paint Passport. Once Autoentic approves your business, you can also measure cars yourself with the Autoentic app.

Dealerships and shops that install paint protection film, or PPF, have their own sections of these docs. A dealership starts with Measuring cars at a dealership, and a PPF or detail shop starts with Getting started.

Why a car's paint is hard to check

The question of whether a car still has its factory paint comes up when you repair it, inspect it, insure it, lend against it or sell it. A careful repaint can look just like factory paint, so it often can't be spotted by eye. Someone's word that the paint is original isn't proof either.

A vehicle history report, such as Carfax or AutoCheck, lists events that were reported, like accidents and title changes. It doesn't measure the paint, so a repair that was never reported doesn't show on it, and a clean report doesn't mean original paint.

A repaint usually adds layers of paint, and a paint thickness gauge measures how thick the paint is. But factory paint is thicker on some cars than on others, depending on the make and model. Without factory data for that model to compare with, readings alone don't say for sure whether a panel's paint came from the factory.

What a Paint Passport shows

A Paint Passport is every Autoentic inspection of one car, saved to its VIN. Anyone can look it up free at autoentic.com/paint-passport, with no account. Each inspection is saved as a record, with the day it was made and a label for each panel it measured. A record covers only the panels it lists, as they were on that day. Work done later shows only when the car is measured again, which adds a new record beside the earlier ones.

Factory Original means the readings are consistent with paint applied at the factory. Factory Acceptable means the readings lean away from factory paint, but not far enough to call the panel refinished. Refinished means the readings differ clearly from factory paint, consistent with a touch-up or repaint. Added Layer (Undetermined Type) means a panel reads thicker than factory paint, but the measurement can't tell what the extra layer is, so Autoentic doesn't guess. That label doesn't say whether the panel was repainted.

Every inspection uses a professional paint thickness gauge. A record says what was measured. It never says why a panel was refinished, and it is not a guarantee. Each record is sealed when it is submitted. A later change to a sealed record would show.

A record as a whole can also carry one of two labels. Autoentic Inspected means the car was measured and the result is on record. It is not a pass or a fail. Autoentic Certified is the top label. A record can carry it when the measurement shows factory paint with high confidence and the record was made by Autoentic, by a business Autoentic has confirmed as independent, or by a dealer's new-car department on a car never listed for sale as used. Records made by a body shop, an insurer, a lender or a fleet don't carry Autoentic Certified. What Autoentic certification means explains when a record carries each.

Measuring cars at a body shop

If you run a body shop, you can use Autoentic to put a car's paint on record when it comes in, before any work starts. The record shows how each panel measured before your repair, dated and saved to the car's VIN. If a question comes up later about a panel you didn't touch, the record shows how it measured when the car arrived. Your repair shows on the car's Paint Passport only if the car is measured again after it.

Once Autoentic has confirmed your business, each record you send from the newest version of the Autoentic app names your shop.

Adding a paint record to pre-purchase inspections

If you're an independent inspector and your pre-purchase inspections already include a paint thickness gauge, Autoentic adds what the gauge alone can't. Each panel is compared with factory data for that model, and the result is saved to the car's VIN. The buyer you inspect for can look it up, and so can anyone who buys the car later. Measuring a car takes about 10 minutes, so it fits into an inspection you already do.

Once Autoentic has confirmed your business as independent, with no stake in selling or repairing cars, each record you send from the newest version of the app names your business. Those records can carry Autoentic Certified when the measurement shows factory paint with high confidence.

Checking a car's record as an insurer or lender

An insurer or a lender can check a car's VIN for a Paint Passport at autoentic.com/paint-passport, for example before insuring it or lending on it. The lookup is free, takes one VIN at a time and needs no account. If the car is on record, you see each measured panel's label and the day of each inspection. Looking up a car by VIN explains each result the lookup can give.

A repair made after the latest record shows only once the car is measured again. A record doesn't put a value on the car. An insurer or a lender can also request access and measure cars itself.

Measuring a fleet's cars

A fleet can use Autoentic to measure its own cars, for example before they go up for sale. Each car's paint is then on record under its VIN, so a buyer can see each measured panel's label before buying. If you measure a car when it joins the fleet and again before you sell it, you can compare the two records panel by panel.

Starting to measure cars

To measure cars yourself, request access and choose your kind of business on the form. Autoentic reviews each request, and approval usually takes a business day or two. You measure with a paint thickness gauge and its probe, which connect to the Autoentic app. Only certain gauges and probes work with the app, with one probe for metal panels and another for plastic ones. You can use ones you already own, or buy them from Autoentic. Bringing your own probe says which ones work, and Buying a probe covers ordering one.

Once you're approved, install the Autoentic app, pair your probe with it and start measuring cars. The app walks you through each step, so it doesn't take a specialist. Measuring a car takes about 10 minutes. You choose a plan in your Autoentic dashboard after your first probe is paired.

To compare plans and request access, go to Autoentic for businesses.


Carfax and AutoCheck are trademarks of their owners. Autoentic isn't affiliated with or endorsed by them.
Last updated: